- : 0086-021-60880117
- :
- : info@sg295steel.com
- : info@sg295steel.com
- : Royal Industry
Related grades: SPCD, SPCC, SPCF, SPCG
SPCE cold-rolled steel sheet is mainly used for deep drawing and shaping process.
SPCE cold-rolled steel sheet for appliances mechanical properties:
|
Grade |
MPa |
MPa |
Elongation %(L0=50mm, b=25mm) not less than |
rmd, e not less than |
|||||||
|
mm nominal thickness |
mm nominal thickness |
||||||||||
|
<0.25 |
0.25~<0.30 |
0.30~<0.40 |
0.40~<0.60 |
0.60~<1.0 |
1.0~<1.6 |
≧1.6 |
0.5~<1.0 |
1.0~<1.6 |
|||
|
SPCE |
220 |
270 |
29 |
32 |
35 |
38 |
40 |
41 |
41 |
_ |
_ |
- when there is no significant yield, RP0.2 should be used; otherwise ReL should be used.
- When the thickness is more than 0.40mm and not more than 0.60mm, the specified value of the yield strength is allowed to increase 20MPa; when the thickness is not more than 0.40mm, the specified value of the yield strength is allowed to increase 40MPa.
c. The sample is the P14 sample in GB/T 228 and the sample direction is transverse.
d. When the thickness is less than 0.5mm and more than 1.6mm, r values are not required
e. rm=(r90+2r45+r0)/4
rm=(r90+2r45+r0)/4
Available range of SPCE cold-rolled steel sheet for appliances:
|
Item |
Nominal size |
|
|
Thickness |
0.25-3.5 |
|
|
Width |
800-1830 |
|
|
Length |
Steel plate |
1000-6000 |
|
Steel strip |
Coil inside diameter 508、610 |
|
Welcome to Shanghai Royal Industry's website www.sphc-steel.com to get more details about SPCE cold-rolled steel sheet for appliances, or you can directly contact our salesmen with the following information:
Email : info@sg295steel.com
Website: www.sphc-steel.com