Cold Rolled Automotive Steel B410LAE+Z steel and strips are featured with good erosion-resistant, high surface quality(O5 plate surface are available) and excellent processing and coating performances. They can be used to manufacture inside an outside automotive plates , structural parts and reinforcements.

Cold Rolled Automotive Steel B410LAE+Z steel plates sizes:
Nominal thickness: 0.30mm~2.0mm, nominal width: 800mm~1830mm
(Note: nominal thickness of a plate/strip is sum of base plate thickness and coating thickness.)

Cold Rolled Automotive Steel B410LAE+Z steel plates mechanical and process performances:

1. The mechanical and process performances of pure zinc coated plates/strips must comply with the stipulations of those of relevant base plates. The base plate grade is B410LA and the corresponding base plate standards is Q/BQB 418-2003.
2. Among the mechanical performances of Zn-Ni alloy coated plates/strips, breakage percent elongation is allowed to be lowered by 2 units against that of relevant base plates, r is allowed to be lowered by 0.2 against that of relevant base plates and other mechanical and process performances shall comply with the stipulations of those of relevant base plates.

Contact us :
Email : info@sg295steel.com
Web : http://www.sphc-steel.com