Related products : BLC steel , BLD steel , BSUFD steel , BUSD steel

BUFD

BUFD low carbon and ultra-low carbon automotive steel
With excellent drawing and welding performance and relatively high dimensional accuracy, the clod rolled low carbon and ultra-low carbon steel plates provided by JW STEEL have been widely applied to manufacture of various automotive parts. With some ductibility, BUFD low carbon and ultra-low carbon automotive steel plates are suitable to simple forming , bending or welding.

BUFD low carbon and ultra-low carbon automotive steel mechanical and process performance:


Steel Grade

Yield strengtha
MPa

Tensile strength Mpa

After Breakage Percent Elongation (L0=80mm, b=20mm)%≥

rb, c

nb, c

Nominal Thickness mm

<0.60

0.60~<1.0

1.0~<1.6

≥1.6

BUFD

120~190

250

42

44

46

48

1.8

0.21

  1. taking RP0.2 in case of indistinct yield, otherwise ReL。
  2. using P14 sample of GB/T228

c. r=(r90+2r45+r0)/4; n= (n90 +2n45+n0)/4.

BUFD low carbon and ultra-low carbon automotive steel plates sizes:
Nominal thickness: 0.30mm~0.35mm, nominal width: 700mm~1850mm.

BUFD low carbon and ultra-low carbon automotive steel tensile strain mark:
It is guaranteed that no tensile strain mark occurs on steel plates and strips at their application in case of room temperature storage.

BUFD low carbon and ultra-low carbon automotive steel surface quality:


Grade

Code No.

Features

Relatively high-grade finishing surface

FB(O3)

It is allowed for the existence of a few surface defects which will not affect forming and coating & plating adhesiveness such as minor scratch, impression, pit, roll mark and oxidation tint.

High-grade finishing surface

FC(O4)

One side of relatively good quality is free from any remarkable defect visible and the other side must reach FB requirements at least.

Ultra high-grade finishing surface

FD(O5)

One side of relatively good quality is free from any defect, namely appearance quality after painting or electrogalvanizing is no affected, and the other side must reach FB requirements at least.

Currently, main domestic makers for sedans and passage cars all use great amount O5 plates for large outside cover parts such as outside door plates, luggage boot cover plates, outside side plates and top covers. They show excellent application effects and can substitute imported steel plates. If you need BUFD low carbon and ultra-low carbon automotive steel, you can search  our web www.sphc-steel.com

If necessary, please leave your message, we will contact you as soon as possible, thank you!

Name:
Email:
Tel:
Message: