Related products : SPCC steel , SPCE steel , SPCEN steel

SPCD

With excellent drawing and welding performance and relatively high dimensional accuracy, the clod rolled low carbon and ultra-low carbon steel plates provided by JW STEEL have been widely applied to manufacture of various automotive parts. With some ductibility, SPCD low carbon and ultra-low carbon automotive steel plates are suitable to simple forming , bending or welding.

SPCD low carbon and ultra-low carbon automotive steel mechanical and process performance: 


Steel grade

Yield strength
MPa≤

Tensile strength Mpa

After Breakage Percent Elongation (L050mm, b=25mm)%≥

Nominal thickness mm

<0.60

0.60<~1.0

1.0~<1.6

≥1.6

SPCD

-

270

36

38

39

40

  1. taking RP0.2 in case of indistinct yield, otherwise ReL.
  2. using P14 sample of GB/T228

SPCD low carbon and ultra-low carbon automotive steel plates sizes:
Nominal thickness: 0.30mm~0.35mm, nominal width: 700mm~1850mm.

SPCD low carbon and ultra-low carbon automotive steel tensile strain mark:
It is guaranteed that no tensile strain mark occurs on steel plates and strips at their application within 3 months after they are produced and in case of room temperature storage.

SPCD low carbon and ultra-low carbon automotive steel surface quality:


Grade

Code No.

Features

Relatively high-grade finishing surface

FB(O3)

It is allowed for the existence of a few surface defects which will not affect forming and coating & plating adhesiveness such as minor scratch, impression, pit, roll mark and oxidation tint.

High-grade finishing surface

FC(O4)

One side of relatively good quality is free from any remarkable defect visible and the other side must reach FB requirements at least.

Ultra high-grade finishing surface

FD(O5)

One side of relatively good quality is free from any defect, namely appearance quality after painting or electrogalvanizing is no affected, and the other side must reach FB requirements at least.

Currently, main domestic makers for sedans and passage cars all use great amount O5 plates for large outside cover parts such as outside door plates, luggage boot cover plates, outside side plates and top covers. They show excellent application effects and can substitute imported steel plates. To get more information about SPCD low carbon and ultra-low carbon automotive steel, please contact us.