- : 0086-021-60880117
- :
- : info@sg295steel.com
- : info@sg295steel.com
- : Royal Industry
Related products : BW400 steel , BW300TP steel , BW300 steel , BW500 steel
BW450 B : Baosteel，W：Wear Resistant Steel, 450：Brinell hardness value
BW450 steel are produced from processes of hot rolling, cutting into length and heat treating. The products are characterized with small thickness, good flatness, outsanding wear resistance, excellent toughness, good weldability, good machinablility, consistent property and quality.
BW450 steel size
|
Grade |
Thickness mm |
Width mm |
Length mm |
|
BW450 |
3-12 |
850-1800 |
2000-12000 |
BW450 steel Chemical Composition wt%
|
Grade |
C≤ |
Si≤ |
Mn≤ |
P≤ |
S≤ |
Alt≤ |
Cr≤ |
Ni≤ |
Ti |
B≤ |
CEV |
|
BW450 |
0.35 |
0.70 |
1.60 |
0.020 |
0.010 |
0.015 |
1.10 |
0.80 |
0.05 |
0.005 |
0.52 |
CEV = C + Mn/6 + Cr/5 + Mo/5 + B/5 + Cu/15 + Ni/15
BW450 steel plate Mechanical Properties
|
Grade |
Thickness(mm) |
Tensile test |
Brinell hardness |
Impact energy |
90° bending |
||
|
Yield strength ReH,MPa |
Tensile strength Rm,MPa |
Elongation A50 % |
HBW |
Impact energy |
Bending diameter |
||
|
BW450 |
3-12 |
≥1100 |
≥1300 |
≥7 |
450±30 |
≥20 |
d = 7a |
Note : Transversal specimen is adopted in the tensile test, thus the long axis of specimen is vertical to rolling direction.
ongitudinal specimen is used in impact test, and the impact value is obtained from standard specimen (10 × 10 × 50mm); The impact value shall be reduced with equal proportion if the smaller sized specimen is used, such as 5mm,7.5mm.
Transversal specimen is used in the bending test. d=bending diameter，a=plate thickness
BW450 steel sheet/plate Typical Properties
|
Parameter |
Unit |
BW450 |
|
CEV(IIW) |
% |
0.52 |
|
Welding crack sensitivity index Pcm |
% |
0.29 |
|
Yield Strength Re |
MPa |
1200 |
|
tensile strength Rm |
MPa |
14300 |
|
Elongation A5 0 |
% |
12 |
|
Impact energy （-40℃） |
J |
60 |
|
HBW |
HBW |
450 |
|
90° bending |
|
D=6t |
|
Young’s modulus(20℃) |
GPa |
210 |
|
Shear modulus(20℃) |
GPa |
80.8 |
|
Poisson ratio(20℃~40℃) |
--- |
0.29 |
|
Density |
g/cm3 |
7.85 |
|
Thermal conductivity (25℃) |
W/(m.K) |
48.54 |
|
Thermal expansivity(25℃) |
1/K |
1.254×10-5 |
|
Specific heat (25℃) |
j/(kg.K) |
451.89 |
Result of block-on-ring wear test
|
Grade |
Average scar width, |
Volume loss |
Volume loss rate |
|
Q345B |
6.90 |
10.0577 |
9.1574E-05 |
|
BW450 |
2.29 |
0.3638 |
3.3122E-06 |
BW450 steel application :
BW450 steels are developed for applications where high wear resistant performance is required, such as dumper, garbage vehicle, concrete mixer truck, industrial air fan, hopper, crusher, machinery for coal, grain , cement, grabbucket, etc.
Shanghai Royal Industry Will return you with high-quality products and complete after-sale service with the lowest price. we committed to exceed customer's expectation on the basis of quality, price, and delivery. We sincerely hope to establish long-term cooperation relationship with you on the basis of mutual benefit, reciprocity and common development. As BW450 Mechanical and BW450 suppliers, we can supply BW450 Chemical, BW450 Mechanical and BW450 standard for you ,please contact us ：info@sg295steel.com